Effect of surface treatment and luting agent type on shear bond strength of titanium to ceramic materials

Basit Öğe Kaydı
dc.authorid0000-0001-8833-5259
dc.contributor.authorKaraokutan, Işıl
dc.contributor.authorSayın Özel, Gülsüm
dc.date.accessioned2022-05-27T11:28:53Z
dc.date.available2022-05-27T11:28:53Z
dc.date.issued2022
dc.departmentİstanbul Medipol Üniversitesi, Diş Hekimliği Fakültesi, Protetik Diş Tedavisi Ana Bilim Dalı
dc.description.abstractPURPOSE. This study aimed to compare the efect of diferent surface treatments and luting agent types on the shear bond strength of two ceramics to commercially pure titanium (Cp Ti). MATERIALS AND METHODS. A total of 160 Cp Ti specimens were divided into 4 subgroups (n = 40) according to surface treatments received (control, 50 ?m airborne-particle abrasion, 110 ?m airborne-particle abrasion, and tribochemical coating). The cementation surfaces of titanium and all-ceramic specimens were treated with a universal primer. Two cubic all-ceramic discs (lithium disilicate ceramic (LDC) and zirconia-reinforced lithium silicate ceramic (ZLC)) were cemented to titanium using two types of resin-based luting agents: self-cure and dual-cure (n = 10). After cementation, all specimens were subjected to 5000 cycles of thermal aging. A shear bond strength (SBS) test was conducted, and the failure mode was determined using a scanning electron microscope. Data were analyzed using three-way ANOVA, and the Tukey-HSD test was used for post hoc comparisons P(<.05). RESULTS. Signifcant diferences were found among the groups based on surface treatment, resin-based luting agent, and ceramic type P(<.05). Among the surface treatments, 50 ?m air-abrasion showed the highest SBS, while the control group showed the lowest. SBS was higher for dual-cure resin-based luting agent than self-cure luting agent. ZLC showed better SBS values than LDC. CONCLUSION. The cementation of ZLC with dual-cure resin-based luting agent showed better bonding efectiveness to commercially pure titanium treated with 50 ?m airborne-particle abrasion.
dc.identifier.citationKaraokutan, I. ve Sayın Özel, G. (2022). Effect of surface treatment and luting agent type on shear bond strength of titanium to ceramic materials. Journal of Advanced Prosthodontics, 14(3), 78-87. https://doi.org/10.4047/jap.2022.14.2.78
dc.identifier.doi10.4047/jap.2022.14.2.78
dc.identifier.endpage87
dc.identifier.issn2005-7806
dc.identifier.issue3
dc.identifier.pmid35601349
dc.identifier.scopus2-s2.0-85129908894
dc.identifier.scopusqualityQ1
dc.identifier.startpage78
dc.identifier.urihttps://doi.org/10.4047/jap.2022.14.2.78
dc.identifier.urihttps://hdl.handle.net/20.500.12511/9477
dc.identifier.volume14
dc.identifier.wos000798988600003en_US
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.indekslendigikaynakPubMed
dc.institutionauthorSayın Özel, Gülsüm
dc.language.isoen
dc.publisherKorean Academy of Prosthodontic
dc.relation.ispartofJournal of Advanced Prosthodonticsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsAttribution-NonCommercial 4.0 International*
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc/4.0/*
dc.subjectBond Strength
dc.subjectHybrid Abutment
dc.subjectLithium Silicate
dc.subjectResin-Based Luting Agent
dc.subjectSurface Treatment
dc.titleEffect of surface treatment and luting agent type on shear bond strength of titanium to ceramic materials
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Sayın Özel-Gülsüm-2022.pdf
Boyut:
1.43 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Diş Hekimliği Fakültesi Makale Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu