Effects of glazing procedures on the color stability of conventional and CAD/CAM hybrid ceramics: A comparative study
Göster/ Aç
Erişim
info:eu-repo/semantics/openAccessAttribution-NonCommercial 4.0 Internationalhttps://creativecommons.org/licenses/by-nc/4.0/Tarih
2019Üst veri
Tüm öğe kaydını gösterKünye
Özyılmaz, Ö. Y., Sayın Özel, G. ve Oğuz Ahmet, B. S. (2019). Effects of glazing procedures on the color stability of conventional and CAD/CAM hybrid ceramics: A comparative study. Meandros Medical and Dental Journal, 20(3), 209-218. https://dx.doi.org/10.4274/meandros.galenos.2019.49369Özet
Objective: Ceramic glazing and polishing are important for patient satisfaction and long-term clinical success. Till date, no study has compared color changes after glazing procedures between conventional and more recently introduced ceramics. In this study, we investigated the effects of glazing procedures on the color stability of conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) hybrid ceramics using a spectrophotometer.Materials and Methods: Eighty-four disc-shaped specimens were fabricated with seven different dental porcelain materials according to the manufacturers' instructions (n=12 each): Ivoclar IPS DSign, Vita Omega 900, Ceramco III, Vita Mark II, Vita Enamic, GC Cerasmart, and Vita Suprinity. Both sides of the specimens were polished with wet 600-, 1000-, and 1500-grit aluminium oxide abrasive papers, and color values (L*, a*, b*) were measured using a spectrophotometer before and after glazing. Treatment-induced changes in the specimen color and topography were evaluated and recorded. The color change (Delta E) was calculated from the changes in the mean L*, a*, and b* values. All data were analyzed using Kruskal-Wallis, Mann-Whitney U, and Wilcoxon tests (95% confidence interval).Results: Color changes were below the clinically perceptible level (Delta E, <3.7) in all specimens. Color change values after the glazing procedures were 2.27 +/- 0.55, 2.99 +/- 0.67, 1.01 +/- 0.58, 1.62 +/- 0.70, 0.74 +/- 0.45, 1.35 +/- 0.52, and 1.37 +/- 0.72 for Ivoclar IPS DSign, Vita Omega 900, Ceramco III, Vita Mark II, GC Cerasmart, Vita Enamic, and Vita Suprinity, respectively; thus, there were significant differences between the conventional and CAD/CAM ceramics (p<0.05). The conventional ceramic Vita Omega 900 presented the least color stability, while the CAD/CAM ceramic GC Cerasmart presented the maximum color stability.Conclusion: Glazing procedures do not cause evident changes in the color of conventional and CAD/CAM hybrid ceramics, although the color stability of the latter is better than that of the former. Amaç: Seramik glaze ve parlatma işlemleri hasta memnuniyeti ve uzun süreli klinik başarı için önemlidir. Bugüne kadar hiçbir çalışma,geleneksel ve daha yeni tanıtılan seramikler arasındaki glaze işlemlerinden sonra renk değişimlerini karşılaştırmamıştır. Bu çalışmadaglaze prosedürlerinin bir spektrofotometre kullanarak geleneksel ve bilgisayar destekli tasarım/bilgisayar destekli üretim (CAD/CAM)hibrit seramiklerin renk stabilitesi üzerindeki etkilerini araştırılmıştır.Gereç ve Yöntemler: Üretici firma talimatlarına göre seksen dört disk şeklindeki örnekten yedi farklı porselen malzemesi ile üretildi(n=12): Ivoclar IPS DSign, Vita Omega 900, Ceramco III, Vita Mark II, Vita Enamic, GC Cerasmart ve Vita Suprinity. Numunelerinher iki tarafı 600-, 1000- ve 1500-grit alüminyum oksit aşındırıcı kağıtlarla aşındırılmış ve glaze işleminden önce ve sonra birspektrofotometre kullanılarak renk değerleri (L*, a*, b*) ölçülmüştür. Örneklerin rengindeki ve topografisindeki tedaviye bağlıdeğişiklikler değerlendirildi ve kaydedildi. Renk değişimi (∆E), ortalama L*, a* ve b* değerlerindeki değişikliklerden hesaplandı. Tümveriler Kruskal-Wallis, Mann-Whitney U ve Wilcoxon testleri kullanılarak analiz edildi (%95 güven aralığı).Bulgular: Renk değişiklikleri tüm örneklerde klinik olarak algılanabilir seviyenin (ΔΕ <3,7) altındaydı. Glaze işlemlerinden sonra renkdeğişimi değerleri sırasıyla Ivoclar IPS DSign, Vita Omega 900, Ceramco III, Vita Mark II, GC Cerasmart, Vita Enamic ve Vita Suprinityiçin 2,27±0,55, 2,99±0,67, 1,01±0,58, 1,62±0,70, 0,74±0,45, 1,35±0,52 ve 1,37±0,72 olarak bulundu; bu nedenle, konvansiyonelve CAD/CAM seramikleri arasında önemli farklılıklar vardı (p<0.05). Geleneksel seramik Vita Omega 900 en düşük renk stabilitesinisunarken, CAD/CAM seramik GC Cerasmart maksimum renk stabilitesini sundu.Sonuç: Glaze prosedürleri, konvansiyonel ve CAD/CAM hibrit seramiklerin renginde belirgin değişikliklere neden olmamakla birlikte,işlem sonrasının renk stabilitesi öncekinden daha iyidir.
Kaynak
Meandros Medical and Dental JournalCilt
20Sayı
3Bağlantı
https://dx.doi.org/10.4274/meandros.galenos.2019.49369https://hdl.handle.net/20.500.12511/5793
Koleksiyonlar
Aşağıdaki lisans dosyası bu öğe ile ilişkilidir: