Show simple item record

dc.contributor.authorÇoban, Ozan
dc.contributor.authorBaşlayıcı, Serkan
dc.contributor.authorBuğdaycı, Mehmet
dc.contributor.authorAçma, Mahmut Ercan
dc.date.accessioned2021-03-25T06:13:01Z
dc.date.available2021-03-25T06:13:01Z
dc.date.issued2021en_US
dc.identifier.citationÇoban, O., Başlayıcı, S., Buğdaycı, M. ve Açma, M. E. (2021). Hydrometallurgical nickel and cobalt productıon from lateritic ores: Optimization and comparison of atmospheric pressure leaching and pug-roast-leaching processes. Acta Metallurgica Slovaca, 27(1), 17-22. https://dx.doi.org/10.36547/ams.27.1.740en_US
dc.identifier.issn1335-1532
dc.identifier.issn1338-1156
dc.identifier.urihttps://dx.doi.org/10.36547/ams.27.1.740
dc.identifier.urihttps://hdl.handle.net/20.500.12511/6648
dc.description.abstractCorresponding to the technological developments, production and consumption of nickel have increased greatly over time due to its unique mechanical and chemical properties. Therefore, the production of nickel will always keep its importance. The availability of laterite ores, which are oxide type ores, is 86% of the nickel reserves on the Earth, and the processes used in the production of nickel from sulphide type ores have negative environmental effects. Therefore, recovery of nickel from lateritic ores has become increasingly important in recent years. In this study, the aim was to determine the optimum parameters of nickel and cobalt production from limonite type lateritic nickel ores, which were taken from Manisa Caldag region of Turkey, using atmospheric pressure sulfuric acid leaching and pug-roast-leach process. When the results obtained in these processes were compared, it was found that the Ni leaching efficiency is nearly 8% higher and iron leaching efficiency (contamination) is nearly 4% lower in the pug-roastleach process. Furthermore, the pug-roast-leach process was completed in 33% lower time compared to the atmospheric pressure sulfuric acid leaching process.en_US
dc.language.isoengen_US
dc.publisherSciCell s.r.o.en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectNickelen_US
dc.subjectCobalten_US
dc.subjectHydrometallurgyen_US
dc.subjectPug-Roast-Leachingen_US
dc.subjectAtmospheric Pressureen_US
dc.titleHydrometallurgical nickel and cobalt productıon from lateritic ores: Optimization and comparison of atmospheric pressure leaching and pug-roast-leaching processesen_US
dc.typearticleen_US
dc.relation.journalActa Metallurgica Slovacaen_US
dc.departmentİstanbul Medipol Üniversitesi, İMÜ Meslek Yüksekokulu, İnşaat Teknolojisi Ana Bilim Dalıen_US
dc.authorid0000-0002-7933-5887en_US
dc.identifier.volume27en_US
dc.identifier.issue1en_US
dc.identifier.startpage17en_US
dc.identifier.endpage22en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.doi10.36547/ams.27.1.740en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record