Basit öğe kaydını göster

dc.contributor.authorÖzyılmaz, Özgün Yusuf
dc.contributor.authorSayın Özel, Gülsüm
dc.contributor.authorOğuz Ahmet, Bebek Serra
dc.date.accessioned2020-09-14T07:07:45Z
dc.date.available2020-09-14T07:07:45Z
dc.date.issued2019en_US
dc.identifier.citationÖzyılmaz, Ö. Y., Sayın Özel, G. ve Oğuz Ahmet, B. S. (2019). Effects of glazing procedures on the color stability of conventional and CAD/CAM hybrid ceramics: A comparative study. Meandros Medical and Dental Journal, 20(3), 209-218. https://dx.doi.org/10.4274/meandros.galenos.2019.49369en_US
dc.identifier.issn2149-9063
dc.identifier.urihttps://dx.doi.org/10.4274/meandros.galenos.2019.49369
dc.identifier.urihttps://hdl.handle.net/20.500.12511/5793
dc.description.abstractObjective: Ceramic glazing and polishing are important for patient satisfaction and long-term clinical success. Till date, no study has compared color changes after glazing procedures between conventional and more recently introduced ceramics. In this study, we investigated the effects of glazing procedures on the color stability of conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) hybrid ceramics using a spectrophotometer.Materials and Methods: Eighty-four disc-shaped specimens were fabricated with seven different dental porcelain materials according to the manufacturers' instructions (n=12 each): Ivoclar IPS DSign, Vita Omega 900, Ceramco III, Vita Mark II, Vita Enamic, GC Cerasmart, and Vita Suprinity. Both sides of the specimens were polished with wet 600-, 1000-, and 1500-grit aluminium oxide abrasive papers, and color values (L*, a*, b*) were measured using a spectrophotometer before and after glazing. Treatment-induced changes in the specimen color and topography were evaluated and recorded. The color change (Delta E) was calculated from the changes in the mean L*, a*, and b* values. All data were analyzed using Kruskal-Wallis, Mann-Whitney U, and Wilcoxon tests (95% confidence interval).Results: Color changes were below the clinically perceptible level (Delta E, <3.7) in all specimens. Color change values after the glazing procedures were 2.27 +/- 0.55, 2.99 +/- 0.67, 1.01 +/- 0.58, 1.62 +/- 0.70, 0.74 +/- 0.45, 1.35 +/- 0.52, and 1.37 +/- 0.72 for Ivoclar IPS DSign, Vita Omega 900, Ceramco III, Vita Mark II, GC Cerasmart, Vita Enamic, and Vita Suprinity, respectively; thus, there were significant differences between the conventional and CAD/CAM ceramics (p<0.05). The conventional ceramic Vita Omega 900 presented the least color stability, while the CAD/CAM ceramic GC Cerasmart presented the maximum color stability.Conclusion: Glazing procedures do not cause evident changes in the color of conventional and CAD/CAM hybrid ceramics, although the color stability of the latter is better than that of the former.en_US
dc.description.abstractAmaç: Seramik glaze ve parlatma işlemleri hasta memnuniyeti ve uzun süreli klinik başarı için önemlidir. Bugüne kadar hiçbir çalışma,geleneksel ve daha yeni tanıtılan seramikler arasındaki glaze işlemlerinden sonra renk değişimlerini karşılaştırmamıştır. Bu çalışmadaglaze prosedürlerinin bir spektrofotometre kullanarak geleneksel ve bilgisayar destekli tasarım/bilgisayar destekli üretim (CAD/CAM)hibrit seramiklerin renk stabilitesi üzerindeki etkilerini araştırılmıştır.Gereç ve Yöntemler: Üretici firma talimatlarına göre seksen dört disk şeklindeki örnekten yedi farklı porselen malzemesi ile üretildi(n=12): Ivoclar IPS DSign, Vita Omega 900, Ceramco III, Vita Mark II, Vita Enamic, GC Cerasmart ve Vita Suprinity. Numunelerinher iki tarafı 600-, 1000- ve 1500-grit alüminyum oksit aşındırıcı kağıtlarla aşındırılmış ve glaze işleminden önce ve sonra birspektrofotometre kullanılarak renk değerleri (L*, a*, b*) ölçülmüştür. Örneklerin rengindeki ve topografisindeki tedaviye bağlıdeğişiklikler değerlendirildi ve kaydedildi. Renk değişimi (∆E), ortalama L*, a* ve b* değerlerindeki değişikliklerden hesaplandı. Tümveriler Kruskal-Wallis, Mann-Whitney U ve Wilcoxon testleri kullanılarak analiz edildi (%95 güven aralığı).Bulgular: Renk değişiklikleri tüm örneklerde klinik olarak algılanabilir seviyenin (ΔΕ <3,7) altındaydı. Glaze işlemlerinden sonra renkdeğişimi değerleri sırasıyla Ivoclar IPS DSign, Vita Omega 900, Ceramco III, Vita Mark II, GC Cerasmart, Vita Enamic ve Vita Suprinityiçin 2,27±0,55, 2,99±0,67, 1,01±0,58, 1,62±0,70, 0,74±0,45, 1,35±0,52 ve 1,37±0,72 olarak bulundu; bu nedenle, konvansiyonelve CAD/CAM seramikleri arasında önemli farklılıklar vardı (p<0.05). Geleneksel seramik Vita Omega 900 en düşük renk stabilitesinisunarken, CAD/CAM seramik GC Cerasmart maksimum renk stabilitesini sundu.Sonuç: Glaze prosedürleri, konvansiyonel ve CAD/CAM hibrit seramiklerin renginde belirgin değişikliklere neden olmamakla birlikte,işlem sonrasının renk stabilitesi öncekinden daha iyidir.en_US
dc.language.isoengen_US
dc.publisherGalenos Yayıncılıken_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial 4.0 International*
dc.rights.urihttps://creativecommons.org/licenses/by-nc/4.0/*
dc.subjectCeramicsen_US
dc.subjectColor Stabilityen_US
dc.subjectComputer-Aided Design/Computer-Aided Manufacturingen_US
dc.subjectHybrid Ceramicen_US
dc.subjectNanoceramicen_US
dc.subjectSeramikleren_US
dc.subjectRenk Stabilizasyonuen_US
dc.subjectBilgisayar destekli Dizayn/Bilgisayar- Destekli Üretimen_US
dc.subjectHibrit Seramiken_US
dc.subjectNanoseramiken_US
dc.titleEffects of glazing procedures on the color stability of conventional and CAD/CAM hybrid ceramics: A comparative studyen_US
dc.title.alternativeGlaze işlemlerinin konvansiyonel ve CAD/CAM hibrit seramiklerin renk stabilizasyonunun üzerine etkisi: Karşılaştırmalı çalışmaen_US
dc.typearticleen_US
dc.relation.ispartofMeandros Medical and Dental Journalen_US
dc.departmentİstanbul Medipol Üniversitesi, Diş Hekimliği Fakültesi, Protetik Diş Tedavisi Ana Bilim Dalıen_US
dc.authorid0000-0002-1387-2989en_US
dc.identifier.volume20en_US
dc.identifier.issue3en_US
dc.identifier.startpage209en_US
dc.identifier.endpage218en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.doi10.4274/meandros.galenos.2019.49369en_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster

info:eu-repo/semantics/openAccess
Aksi belirtilmediği sürece bu öğenin lisansı: info:eu-repo/semantics/openAccess