• Effect of thermocycle and bonding agents on the bond strength of titanium-resin cements 

  Sayın Özel, Gülsüm; Akın, Ceyda; Oğuz Ahmet, Bebek Serra (Bezmiâlem Vakıf University, 2021)

  Objective: This research aimed to evaluate the effect of different resin cement (RC) types, compare the effect of surface treatments and bonding applications and evaluate the effect of thermal cycling on bond strengths to ...

• Effect of horizontal osteotomy level on complication rates and neurosensory deficits after sagittal split ramus osteotomy 

  Süzen, Muazzez; Uçkan, Sina; Münevveroğlu, Sümer; Özel, Abdullah (Lippincott Williams & Wilkins, 2021)

  Horizontal osteotomy is one of the most critical step at sagittal split ramus osteotomy (SSRO) and determination of the ideal height of this horizontal osteotomy is essential to avoid nerve and vessel injury. Purpose: The ...

• Aesthetic repair of zirconia-supported porcelain prosthesis with ceramic veneer, case report with 3-year follow-up 

  Ordueri, Tuğçe Merve; Kaptanoğlu, Asena; Ateş, Mehmet Muzaffer (Premchand Shantidevi Research Foundation, 2021)

  Chipping is the most common complication in zirconia-supported porcelain prosthesis. If the prosthesis has ideal adaptation and there is no problem other than chipping, intraoral repair is the most practical solution for ...

• Dental enumeration and multiple treatment detection on panoramic X-rays using deep learning 

  Yüksel, Atıf Emre; Gültekin, Sadullah; Simsar, Enis; Özdemir, Şerife Damla; Gündoğar, Mustafa; Tokgöz, Salih Barkın; Hamamcı, İbrahim Ethem (Nature Research, 2021)

  In this paper, a new powerful deep learning framework, named as DENTECT, is developed in order to instantly detect five different dental treatment approaches and simultaneously number the dentition based on the FDI notation ...

• The effect of final irrigation solutions used during regenerative endodontic treatment on the push-out bond strength of endodontic cements: An in vitro study 

  Eyüboğlu, Tan Fırat; Olcay, Keziban (Hacettepe University, 2020)

  Background and Aim: Study’s aim was to compare the effect of boric acid versus ethylene-diamine-tetra-acetic acid (EDTA) in regenerative endodontic treatment on the push-out bond strength of endodontic cements. Materials ...

• Prevalence and characteristics of foramen huschke: Cone beam computed tomography study 

  Akbulut, Aslıhan; Demirel, Oğuzhan (Formerly Turgut Özal Medical Center, 2020)

  Aim: Aim: Foramen Huschke (FH) is an anatomical variant seen on the anterior aspect of external auditory canal. Aim of this study is to define the prevalence and characteristics of FH in a group of patients using cone beam ...

• Farklı periodontopatojenlerin RAW 264.7 makrofajları tarafından fagositozunun değerlendirilmesi 

  Balcı, Nur; Salehli, Adile; Toksöz, Esat Buğrahan; Çetin, Metin; Yılmaz, Melis; Er, Sevda (Ege Üniversitesi, 2020)

  Amaç: Periodontitis, spesifik periodontal patojenlerin ileri doku kaybına neden olduğu kronik inflamatuar bir hastalıktır. Kronik inflamatuar hastalıklarda, bakterilerin makrofaj gibi özel fagositik hücreler tarafından ...

• Periodontal sağlığın in vitro fertilizasyon sonuçları üzerine etkisinin değerlendirilmesi 

  Altaş, Nurcan; Uslu Toygar, Hilal; Cilasun, Ülkem; Kumbak Aygün, Banu; Demir, Becen (Afyonkarahisar Sağlık Bilimleri Üniversitesi, 2020)

  AMAÇ: Bu çalışmanın amacı sistemik sağlık üzerinde et-kisi kanıtlanmış olan periodontal durumun infertil kadın-larda uygulanan in vitro fertilizasyon tedavisi sonuçları üzerindeki etkisini değerlendirmektir. GEREÇ VE YÖNTEM: ...

• Comparison of four different electronic pain rating scales in patients with symptomatic tooth 

  Eyüboğlu, Tan Fırat (Ege Üniversitesi Diş Hekimliği Fakültesi, 2020)

  Introduction: The study aimed was to assess correlation and evaluate the agreement level between four different electronic pain rating scales in patients with symptomatic teeth.Methods: 50 patients with symptomatic teeth ...

• Alveolar crest height and maxillary sinus mucosa: Cone beam computed tomography evaluation 

  Demirel, Oğuzhan; Akbulut, Aslıhan (Ege Üniversitesi, 2020)

  Introductıon: For dental implant placement, primary requirement is adequate bone. Alveolar crest atrophy in maxillar posterior area may necessitate sinus augmentation. During sinus augmentation, complications may be seen ...

• Oral health-related knowledge, attitudes and behaviours of elementary school teachers 

  Yılmaz, Gülçin; Riad, Abanoub; Krsek, Martin; Kurt, Hanefi; Attia, Sameh (MDPI AG, 2021)

  Abstract: Background: elementary schoolteachers play a central role in shaping their students’ beliefs, attitudes, and behaviours related to health and oral hygiene. This study was designed to evaluate Turkish schoolteachers’ ...

• In vitro accuracies of 3D printed models manufactured by two different printing technologies 

  Emir, Faruk; Ceylan, Gülsüm; Ayyıldız, Simel (Istanbul University Press, 2021)

  Purpose This study aims to compare the accuracies of full-arch models printed by two different 3D printing technologies. Materials and Methods A mandibular horseshoe-shaped master model was designed with RapidForm XOR2 ...

• Applications of contemporary imaging modalities in orthodontics 

  Cesur, Emre; Orhan, Kaan (Ondokuz Mayıs Üniversitesi, 2021)

  The validity of orthodontic diagnosis and treatment planning depends on the accuracy of the photos, models and radiograps to be obtained from the patient. One of the most important parts of diagnosis and treatment planning ...

• Comparison of scleral show alterations following Le Fort I osteotomy with either maxillary impaction or lengthening 

  Çukurova Yılmaz, Zeynep; Özel, Abdullah; Sağlam, Reyhan; Uçkan, Sina (Churchill Livingstone, 2021)

  This study aimed at evaluating changes in scleral show following Le Fort I osteotomy with either impaction or lengthening of the mid face. Patients who underwent Le Fort I osteotomy were included. The patients were divided ...

• Determination of the thickness of the safe enamel for laminate veneer preparation and orthodontic stripping by CBCT 

  Yağcı, Filiz; Türker, Gökhan; Yılancı, Hilal (Wolters Kluwer Medknow Publications, 2021)

  Aim: The purpose of this study is to determine the thickness and limitation of the safe enamel for laminate veneers and orthodontic stripping applications. Enamel thickness (ET) was determined in detail for each tooth and ...

• Periodontal durumun tükürük growth arrest-specific protein 6(Gas6) düzeyi üzerine etkisinin incelenmesi 

  Balcı, Nur; Dyrmishi, Arten; Çetin, Metin; Çekici, Ali (Atatürk Üniversitesi Diş Hekimliği Fakültesi, 2020)

  Amaç Periodontitis, diş destek dokularında yıkımla karakterize olan ve değişik formları bulunan kronik inflamatuar bir hastalıktır. Growth arrest-specific protein 6(Gas6), hücre proliferasyonunu, adezyonunu, migrasyonunu, ...

• Postoperative pain after different irrigation activation techniques: A randomized, clinical trial 

  Gündoğar, Mustafa; Sezgin, Güzide Pelin; Sönmez Kaplan, Sema; Özyürek, Hande; Uslu, Gülşah; Özyürek, Taha (Springer, 2021)

  The aim of this study was to assess the effectiveness of irrigation activation techniques on postoperative pain (PP) in mandibular premolar teeth with irreversible pulpitis after single-visit endodontic treatment. A total ...

• Effect of home and over the contour bleaching on stainability ofCAD/CAMesthetic restorative materials 

  Tınastepe, Neslihan; Malkondu, Özlem; İşcan, İpek; Kazazoğlu, Ender (Wiley, 2021)

  Objective To determine the effect of home and over the counter bleaching on the stainability of CAD/CAM restorative materials, and to correlate the surface roughness with discoloration. Material and Methods Specimens were ...

• Effect of anti-rotational abutment features and novel computerized fabrication techniques on the marginal fit of implant-supported metal copings 

  Aktaş, Güliz; Güncü, Mustafa Barış; Akçin, Elif Tuba; Çakan, Umut; Canay, Şenay (Wiley, 2021)

  Purpose An in vitro study to compare the marginal fit of cobalt-chromium (Co-Cr) metal copings fabricated with selective laser melting (SLM), computer-aided design and computer-aided manufacturing (CAD/CAM) milling, and ...

• Cyclic fatigue resistance of reduced-taper nickel-titanium (NiTi) instruments in doubled-curved (S-shaped) canals at body temperature 

  Uslu, Gülşah; Gündoğar, Mustafa; Özyürek, Taha; Plotino, Gianluca (Tabriz University of Medical Sciences, Faculty of Dentistry, 2020)

  Background. This study was conducted to compare the cyclic fatigue resistance of VDW.ROTATE, TruNatomy Prime, HyFlex CM, and 2Shape nickel-titanium (NiTi) rotary instruments in double-curved canals in a simulated clinical ...

View more