Show simple item record

dc.contributor.authorŞener Yamaner, Işıl Damla
dc.contributor.authorEkici, Bülent
dc.contributor.authorSertgöz, Atilla
dc.contributor.authorYüzbaşıoğlu, Emir
dc.contributor.authorÖzcan, Mutlu
dc.date.accessioned10.07.201910:49:13
dc.date.accessioned2019-07-10T19:57:12Z
dc.date.available10.07.201910:49:13
dc.date.available2019-07-10T19:57:12Z
dc.date.issued2017en_US
dc.identifier.citationŞener Yamaner, I. D., Ekici, B., Sertgöz, A., Yüzbaşıoğlu, E. ve Özcan, M. (2017). Finite element analysis on the optimal material choice and cavity design parameters for MOD inlays exposed to different force vectors and magnitudes. Journal of Adhesion Science and Technology, 31(1), 8-20. https://dx.doi.org/10.1080/01694243.2016.1195953en_US
dc.identifier.issn0169-4243
dc.identifier.issn1568-5616
dc.identifier.urihttps://dx.doi.org/10.1080/01694243.2016.1195953
dc.identifier.urihttps://hdl.handle.net/20.500.12511/2924
dc.descriptionWOS: 000386328700002en_US
dc.description.abstractThis simulation study evaluated the effect of three different inlay materials (composite, glass ceramic, zirconia), cavity design parameters (isthmus width and depth) and different force vectors and magnitudes on the stress distribution within mesio-occlusal-distal (MOD) inlays and the remaining enamel and dentin. The mechanical performance of inlays was evaluated using 3-D finite element analysis (FEA) method. Three different restoration materials and hard tissues of the restored tooth with different cavity depth (2-5mm) and width (2-4mm) were exposed to occlusal loading with different magnitudes from 10 to 130kg at varying angles between 0 degrees and 15 degrees. The maximum von Mises stresses were calculated for the inlays, tooth structure and bonded surfaces. Response Surface Optimization method was implemented into the finite element software package in order to design cavity shapes with more favourable interfacial stresses for bonded restorations under occlusal loading. Teeth restored with resin composite exhibited the highest von Mises Stress, followed by glass ceramic and zirconia. The increase in isthmus width decreased interfacial shear stresses in zirconia MOD inlay but the increase in cavity depth did not change the stress levels for all three materials. According to mechanical safety factor, inlay and tooth structure remained within the mechanical limits in three parameters (material, magnitude of force, cavity shape) but negatively affected by the force vector.en_US
dc.language.isoengen_US
dc.publisherTaylor & Francis Ltd.en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCavity Depthen_US
dc.subjectCavity Widthen_US
dc.subjectFinite Element Analysisen_US
dc.subjectMOD Inlaysen_US
dc.titleFinite element analysis on the optimal material choice and cavity design parameters for MOD inlays exposed to different force vectors and magnitudesen_US
dc.typearticleen_US
dc.relation.journalJournal of Adhesion Science and Technologyen_US
dc.departmentİstanbul Medipol Üniversitesi, Diş Hekimliği Fakültesi, Protetik Diş Tedavisi Ana Bilim Dalıen_US
dc.departmentİstanbul Medipol Üniversitesi, Rektörlük, Rejeneratif ve Restoratif Tıp Araştırmaları Merkezi (REMER)en_US
dc.authorid0000-0001-5348-6954en_US
dc.identifier.volume31en_US
dc.identifier.issue1en_US
dc.identifier.startpage8en_US
dc.identifier.endpage20en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.doi10.1080/01694243.2016.1195953en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record