dc.contributor.author | Çakan, Umut | |
dc.contributor.author | Çakan, Murat | |
dc.contributor.author | Delilbaşı, Çağrı | |
dc.date.accessioned | 10.07.201910:49:13 | |
dc.date.accessioned | 2019-07-10T19:56:50Z | |
dc.date.available | 10.07.201910:49:13 | |
dc.date.available | 2019-07-10T19:56:50Z | |
dc.date.issued | 2016 | en_US |
dc.identifier.citation | Çakan, U., Çakan, M. ve Delilbaşı, Ç. (2016). Evaluation of heat transfer to the implant-bone interface during removal of metal copings cemented onto titanium abutments. International Journal Of Prosthodontics, 29(3), 290-292. https://dx.doi.org/10.11607/ijp.4561 | en_US |
dc.identifier.issn | 0893-2174 | |
dc.identifier.issn | 1942-4426 | |
dc.identifier.uri | https://dx.doi.org/10.11607/ijp.4561 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12511/2829 | |
dc.description | WOS: 000376213500018 | en_US |
dc.description | PubMed ID: 27148993 | en_US |
dc.description.abstract | Purpose: The aim of this investigation was to measure the temperature increase due to heat transferred to the implant-bone interface when the abutment screw channel is accessed or a metal-ceramic crown is sectioned buccally with diamond or tungsten carbide bur using an air rotor, with or without irrigation. Materials and Methods: Cobalt-chromium copings were cemented onto straight titanium abutments. The temperature changes during removal of the copings were recorded over a period of 1 minute. Results: The sectioning of coping with diamond bur and without water irrigation generated the highest temperature change at the cervical part of the implant. Conclusion: Both crown removal methods resulted in an increase in temperature at the implant-bone interface. However, this temperature change did not exceed 47 degrees C, the potentially damaging threshold for bone reported in the literature. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Quintessence Publishing Co Inc | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Evaluation of Heat | en_US |
dc.subject | Implant-Bone | en_US |
dc.subject | Removal of Metal Copings | en_US |
dc.subject | Cemented Onto Titanium Abutments | en_US |
dc.title | Evaluation of heat transfer to the implant-bone interface during removal of metal copings cemented onto titanium abutments | en_US |
dc.type | article | en_US |
dc.relation.ispartof | International Journal Of Prosthodontics | en_US |
dc.department | İstanbul Medipol Üniversitesi, Diş Hekimliği Fakültesi, Protetik Diş Tedavisi Ana Bilim Dalı | en_US |
dc.department | İstanbul Medipol Üniversitesi, Diş Hekimliği Fakültesi, Ağız, Diş ve Çene Cerrahisi Ana Bilim Dalı | en_US |
dc.authorid | 0000-0003-3347-1151 | en_US |
dc.identifier.volume | 29 | en_US |
dc.identifier.issue | 3 | en_US |
dc.identifier.startpage | 290 | en_US |
dc.identifier.endpage | 292 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.identifier.doi | 10.11607/ijp.4561 | en_US |
dc.identifier.wosquality | Q4 | en_US |
dc.identifier.scopusquality | Q1 | en_US |