Ara
Toplam kayıt 9, listelenen: 1-9
Flue gas desulfurization by using calcined dolomite
(Institute of Physics Publishing, 2019)
SO2 emissions has begun to cause serious problems in industrialized countries. Today, various methods are used for removal of SO2 gas. SO2 gas is an important raw material for production of sulfuric acid. However, SO2 ...
Effects of reductant type on the combustion synthesis of NiB
(Elsevier, 2021)
Ni-B intermetallic alloys are important filler materials which are used in brazing applications. Carbothermic and aluminothermic synthesis routes are main methods to produce NiB. Carbothermic synthesis is carried out in ...
Corrosion behaviour of hydroxyapatite coatings on AZ31 and AZ91 magnesium alloys by plasma spray
(Hanyang University, 2021)
In the scope of this study, AZ31 and AZ91 magnesium alloys are to be coated with hydroxyapatite by plasma spray to be used as biodegradable implant material and their in-vitro corrosion behaviors are to be examined. There ...
Corrosion behavior of hydroxyapatite coated AZ31 and AZ91 Mg alloys by electrostatic spray coating
(Walter de Gruyter GmbH, 2022)
Magnesium and its alloys are excellent implant material candidates with their biodegradable structure and mechanical properties close to human bone. In order to provide the desired strength in implant applications, the ...
Hydrometallurgical nickel and cobalt productıon from lateritic ores: Optimization and comparison of atmospheric pressure leaching and pug-roast-leaching processes
(SciCell s.r.o., 2021)
Corresponding to the technological developments, production and consumption of nickel have increased greatly over time due to its unique mechanical and chemical properties. Therefore, the production of nickel will always ...
Investigation on structural and adsorptive features of BaO modified zeolite powders prepared by ball milling technique: Removal of tetracycline and various organic contaminants
(Elsevier B.V., 2023)
In the current study, the removal of tetracycline (TC) antibiotic via BaO-doped zeolite (80BaO@zeolite), which synthesized by ball-mill technique, from water by adsorption process was studied. The structure and properties ...
Promoting photo-fenton catalytic performance of novel NiZrO3-type perovskite: Optimization with response surface methodology
(Elsevier B.V., 2024)
Perovskite type NiZrO3 photocatalysts were synthesized by ball-mill technique and used for tetracycline (TC) degradation. NiZrO3 milled for 6 h (NiZrO3-6h) had significant-99 % photo-Fenton catalytic activity on TC removal ...
Vacuum carbothermal synthesis of TiB2
(Pleiades Publishing, 2023)
Abstract: In this study, the formation conditions of TiB2, whose main production method is carbothermal reduction, at lower temperatures with additional processes (vacuum, mechanical activation and functional addition ...
Synthesis of CuBDC metal-organic framework supported zinc oxide via ball-milling technique for enhanced adsorption of Orange-II
(Elsevier B. V., 2024)
For the first time, copper-based metal-organic framework (CuBDC) supported ZnO composite was successfully prepared by the ball-milling method for effective adsorption of anionic azo orange-II (OII) dye. After comparing the ...